Dual extruder 3D printer designed for industrial applications where accuracy, speed, comfort and safety of the entire 3D printing process are crucial.
This 3D printer is suitable for working with a wide range of technical materials including the high-performance thermoplastics.
Achieve the best results with unmatched speed on INDUSTRY F350.
The advanced kinematic system enables print speeds up to 400 mm/s and travel move of 1000 mm/s, all while ensuring top-standard results.
The F350 was designed with a key focus on enhancing user and print productivity.
F350 is equipped with actively heated build chamber, for optimum printing conditions.
The combination of the heated build chamber, appropriate extrusion temperatures, and heated material chamber, ensures that the prints made of high-performance polymers like PC or PEEK are always of best possible quality.
The heated chamber allows to print polycarbonate, PC blends or copolymers reaching the expected mechanical properties, without warping or any other printing failures.
3DGence DOUBLE enables 3D printing from water-soluble material BVOH, which allows removing supports without problems. Thanks to this solution you don’t have to manually deal with supports printed with HIPS or other breakaway materials.
An attempt to remove the supports mechanically may cause damage to the printout. BVOH support material gives the possibility of rinsing support material from the model and leave it in a perfect form.
Is the water temperature relevant?
The best effects of dissolving support material can be achieved with warm water. However, it can not be a temperature that threatens the building material. Water heated up to approx. 50°C will help remove the supports from the printout much faster. This process can also be improved by mixing water.
Finally, ensuring optimal conditions, such as in an ultrasonic cleaner, will dissolve the BVOH filament in just a few minutes.
Print high-performance and engineering grade materials on one machine.
The possibility of using three different modules in one 3D printer allows to produce repeatable models from the widest range of filaments.
Printing modules are interchangable between F350 and F420 INDUSTRY line 3D printers.
Current materials portfolio – PEEK, PA6, PA-CF, PC, ABS, ASA and PLA
3DGence DOUBLE enables 3D printing from water-soluble material BVOH, which allows removing supports without problems. Thanks to this solution you don’t have to manually deal with supports printed with HIPS or other breakaway materials.
An attempt to remove the supports mechanically may cause damage to the printout. BVOH support material gives the possibility of rinsing support material from the model and leave it in a perfect form.
Is the water temperature relevant?
The best effects of dissolving support material can be achieved with warm water. However, it can not be a temperature that threatens the building material. Water heated up to approx. 50°C will help remove the supports from the printout much faster. This process can also be improved by mixing water.
Finally, ensuring optimal conditions, such as in an ultrasonic cleaner, will dissolve the BVOH filament in just a few minutes.
Best in class total cost of ownership
Benefit from the best price to volume ratio among the industrial-grade 3D printers with 3DGence INDUSTRY line. Save time and money during the full lifetime of your industrial 3D printer.
3DGence DOUBLE enables 3D printing from water-soluble material BVOH, which allows removing supports without problems. Thanks to this solution you don’t have to manually deal with supports printed with HIPS or other breakaway materials.
An attempt to remove the supports mechanically may cause damage to the printout. BVOH support material gives the possibility of rinsing support material from the model and leave it in a perfect form.
Is the water temperature relevant?
The best effects of dissolving support material can be achieved with warm water. However, it can not be a temperature that threatens the building material. Water heated up to approx. 50°C will help remove the supports from the printout much faster. This process can also be improved by mixing water.
Finally, ensuring optimal conditions, such as in an ultrasonic cleaner, will dissolve the BVOH filament in just a few minutes.
INDUSTRY F350 meets the Industry 4.0 requirements.
3DGence CLOUD includes such services and functionalities as running or queueing the prints, remote monitoring of the printer and prints status, file sharing, live camera feed and collection of the statistics. The software dedicated to the 3DGence industrial printers INDUSTRY F420 and F350.
3DGence DOUBLE enables 3D printing from water-soluble material BVOH, which allows removing supports without problems. Thanks to this solution you don’t have to manually deal with supports printed with HIPS or other breakaway materials.
An attempt to remove the supports mechanically may cause damage to the printout. BVOH support material gives the possibility of rinsing support material from the model and leave it in a perfect form.
Is the water temperature relevant?
The best effects of dissolving support material can be achieved with warm water. However, it can not be a temperature that threatens the building material. Water heated up to approx. 50°C will help remove the supports from the printout much faster. This process can also be improved by mixing water.
Finally, ensuring optimal conditions, such as in an ultrasonic cleaner, will dissolve the BVOH filament in just a few minutes.
Ensured user safety and work continuity.
With a focus on high-performance materials, it’s important to provide adequate emissions control. F350 filteration system offer unprecedented filtering efficiency among FFF AM platforms, capable of filtering: macro dust, nano dust (VOC, UFP), solvent vapour, noxious gasses, foreign particles.
F350 can be equipped with a UPS unit, that supports all functions during power outages. Signal tower is an additional accessory, indicates the status of the print and makes the machine highly visible from distant parts of the production site.
Other INDUSTRY F350 safety features:
• an electronic lock of the main chamber door, also controlled via Cloud service and printers’ interface
• sensors for main chamber door and top access hatch
• redundancy for thermal sensors of high-power heating elements
• emergency switch – immediate cut of power to motion and thermal control.
• system for emergency shutdown of logic
• software access overdrive – the printer can be remotely shut down.
Smart Material Manager is a intelligent filament and printing environment control system.
SMM consists of a number of solutions:
Proper filaments handling ensures the best results. Keep your materials always dry and ready to print.
Materials are kept in a stable environment due to the heated materials chamber. Humidity for the loaded materials will be reduced regardless of the 3D printer’s operational status thanks to the active chamber heating system.
3DGence DOUBLE enables 3D printing from water-soluble material BVOH, which allows removing supports without problems. Thanks to this solution you don’t have to manually deal with supports printed with HIPS or other breakaway materials.
An attempt to remove the supports mechanically may cause damage to the printout. BVOH support material gives the possibility of rinsing support material from the model and leave it in a perfect form.
Is the water temperature relevant?
The best effects of dissolving support material can be achieved with warm water. However, it can not be a temperature that threatens the building material. Water heated up to approx. 50°C will help remove the supports from the printout much faster. This process can also be improved by mixing water.
Finally, ensuring optimal conditions, such as in an ultrasonic cleaner, will dissolve the BVOH filament in just a few minutes.
Guarantee of optimal working conditions. Take control over the printing process and get the results you want.
Smart Material Manager is an intelligent filament and printing environment control system. SMM consists of NFC reader for loaded material recognition, material weight control system, automatic material loading system and flows control sensor.
Smart Material Manager is a intelligent filament and printing environment control system.
SMM consists of a number of solutions:
3D printing is increasingly used in medicine and allows for detailed planning of operations. This makes it possible to select the appropriate operating technique, discuss it in the team and shorten the time of the procedure itself.
The construction of a prototype form is a long-term process, and the implementation time is very important. Check what goals Geo Globe Polska achieved thanks to the 3D printing technology.
The use of 3DGence INDUSTRY F340 allowed verifying the vacuum manifold, which is one of the elements creating a hydraulic system of a pump compartment inside fire engines.
In the process of revitalization, it is important to present the building’s body with a high detail referring to the original design. PANOVA created the complex building model based on archival materials from 1897 in 1:75 scale using 3D printing technology.
Electric auto-revolution can be supported by 3D printing technology! Using 3D printer AGH Racing could test original design of steering knuckle at a very low cost and in just two days.
Polystyrene-based polymer similar to ABS but its mechanical properties are slightly higher.
You are not convinced that you will benefit from 3D printing?
3DGence specialists will identify possible areas of application for 3D printing in your company and show what savings can be generated by using this technology in the long term.
Technological audit is a free of charge service.
Print technology
FFF
Build volume
340 x 340 x 350 mm (13.39 X 13.39 X 13.78 in)
Minimum layer height
50 µm
Number of printheads
2, printhead purging system
Filament diameter
1.75 mm
Printhead temperature
500 °C
Buildplate temperature
160 °C
Chamber temperature
140 °C (active heating)
Filament chamber temperature
50 °C
Travel move
1000 mm/s
Printing speed
Up to 400 mm/s
Power requirements
230V
Max. power draw w/o accessories
2800W
Max. power draw with accessories
3300W
Communication
Ethernet, Wi-Fi, USB drive
Slicing software
3DGence SLICER 4.0
Cloud based services
3DGence CLOUD
Filtration
Advanced filtration unit
Sensors
Main chamber door, top access hatch, thermal sensors, emergency switch
UPS device
Yes, optional
Others
Software access overdrive – remote shut down