Opis Stanowiska:

  • Planowanie produkcji na Farmie druku 3D ze szczególnym uwzględnieniem optymalizacji i terminowości realizacji zleceń oraz utylizacji dostępnego parku maszynowego,
  • Organizacja pracy działu usług 3D,
  • Nadzorowanie pracy pracowników oraz ciągły rozwój ich kompetencji,
  • Bieżąca analiza efektywności wykorzystania parku maszynowego i wypracowywanie rozwiązań pozwalających  na optymalizację wykorzystania mocy przerobowych oraz redukcję odrzutu,
  • Przygotowanie i przedstawienie raportów zawierających zestawienie czasu pracy drukarek,
  • Obsługa systemu ERP (IFS) w Dziale Usług Druku 3D,
  • Sporządzanie wycen towarów i usług dla klientów 3DGence,
  • Prowadzenie historii klientów w wewnętrznym systemie CRM,
  • Nadzorowanie aktualizacji i kalibracji drukarek należących do Działu Usług Druku 3D,
  • Prowadzenie ścisłej współpracy ze wszystkimi działami 3DGence,
  • Przekazywanie uwag i spostrzeżeń do Działu R&D, Działu Produkcji i Działu Kontroli Jakości w celu ciągłego rozwoju produktów 3DGence,
  • Przygotowanie raportów cotygodniowych zawierających zestawienie wykonanych zadań

Oczekiwania:  

  • Minimum roczne doświadczenie w zarządzaniu zespołami oraz planowaniu i nadzorowaniu produkcji
  • Wykształcenie wyższe
  • Umiejętności zarządzania projektami
  • Umiejętność samodzielnego działania i kreatywnego myślenia,
  • Doskonała organizacja pracy,
  • Znajomość języka angielskiego,
  • Obsługa pakietu MS Office,
  • Mile widziana praktyczna wiedza o druku 3D

Oferujemy:

  • Umowę o pracę,
  • Ciekawą i pełną wyzwań pracę w dziale zajmującym się rozwojem nowoczesnych technologii,
  • Możliwość zdobycia wszechstronnych doświadczeń zawodowych,
  • Atrakcyjne wynagrodzenie oraz system premiowy,
  • Możliwość awansu
  • Dodatkowy pakiet prywatnej Opieki Medycznej ,
  • System benefitów sportowo – rekreacyjnych OK SYSTEM,
  • Możliwość skorzystania z grupowego ubezpieczenia w ERGO HESTIA,
  • Pracę w młodym, dynamicznym zespole,
  • Przyjazną atmosferę,
  • Pyszną kawę z ekspresu

CV prosimy przesyłać na adres: [email protected]

W przesyłanych dokumentach należy dopisać następującą klauzulę: “Wyrażam zgodę na przetwarzanie moich danych osobowych zawartych w dokumentach aplikacyjnych, przez 3DGence sp. z o. o., FTF Columbus S.A. i FTF Galleon S.A. i podmioty od nich zależne w celu realizacji aktualnego oraz przyszłych procesów rekrutacyjnych. Zgoda może zostać w każdym czasie odwołana”

Uwaga!
W przypadku braku klauzuli, CV zostanie usunięte – https://3dgence.com/regulamin/
Kontaktujemy się tylko z wybranymi kandydatami.
Szczegółowe informacje dot. zatrudnienia zostaną udzielone podczas rozmowy.

job description:
  • Supervision of the process of printing the particular parts both for the needs of the company and within the performance of customer orders
  • Drafting and submitting reports which comprise the specification of printer operation time for each week of operation (the week of operation is counted from Monday to Sunday)
  • Implementation of the ERP (IFS) system in the 3D Printing Services Department and performance of tasks ordered via the ERP (IFS) system
  • Performance and supervision of organisational activities at the 3D Printing Services Department as well as motivating the Services Department staff and development of their competencies
  • Supervision of updates and calibration of the printers owned by the 3D Printing Services Department
Expectations:
  • Minimum one year experience in managing teams
  • Taking responsibility for your own work and that of the team
  • Higher education
  • Ability to manage projects
  • Practical knowledge of 3D printing
  • Independent working and creating thinking ability
  • Experience in managing service products
  • Good work organisation
  • English command Fluency in MS Office software handling
We offer:
  • Employment contract,
    Interesting and challenging work in a department dealing with the development of modern technologies,
  • Opportunity to gain comprehensive professional experience,
  • Attractive salary and bonus system,
  • Additional package of private Healthcare Service,
  • Sports and leisure benefits systems – OK SYSTEM,
  • Opportunity to avail of group insurance at ERGO HESTIA,
  • Opportunity to participate in a language course (English),
  • Team-building events,
  • Friendly atmosphere.

The interested persons are requested to send us a CV.

In the documents sent, please add the following clause: “I consent to the processing of my personal data comprised in the application documents by 3DGence sp. z o.o., FTF Columbus S.A., and FTF Galleon S.A. as well as their subsidiaries, for the purpose of the current and future recruitment processes. The consent may be withdrawn at any moment.”

Note!
In the absence of the clause your CV will be deleted.
https://3dgence.com/regulamin/

We will contact only the selected candidates.
Detailed information regarding employment will be provided during interview.

 

Apply

 

Apply for this job

    Apply now

    *
    Required

    Job Position

    First Name *


    Last Name *


    Email *


    Phone *


    Resume/CV *


    (File types: pdf, doc, docx, txt, rtf)
    or

    Cover Letter


    (File types: pdf, doc, docx, txt, rtf)
    or


    School

    Degree



    LinkedIn Profile


    Website


    Will you require visa sponsorship now or at any point in the future? *


    What are your compensation expectations? *



    Voluntary Self-Identification

    For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

    As set forth in 3DGence’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

    Gender


    Are you Hispanic/Latino?


    Race & Ethnicity Definitions

    If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

    A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

    A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

    An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

    An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

    Veteran Status



    Voluntary Self-Identification of Disability

    Why are you being asked to complete this form?

    We are a federal contractor or subcontractor required by law to provide equal employment opportunity to qualified people with disabilities. We are also required to measure our progress toward having at least 7% of our workforce be individuals with disabilities. To do this, we must ask applicants and employees if they have a disability or have ever had a disability. Because a person may become disabled at any time, we ask all of our employees to update their information at least every five years.

    Identifying yourself as an individual with a disability is voluntary, and we hope that you will choose to do so. Your answer will be maintained confidentially and not be seen by selecting officials or anyone else involved in making personnel decisions. Completing the form will not negatively impact you in any way, regardless of whether you have self-identified in the past. For more information about this form or the equal employment obligations of federal contractors under Section 503 of the Rehabilitation Act, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

    How do you know if you have a disability?

    You are considered to have a disability if you have a physical or mental impairment or medical condition that substantially limits a major life activity, or if you have a history or record of such an impairment or medical condition.

    Disabilities include, but are not limited to:

    • Autism

    • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, or HIV/AIDS

    • Blind or low vision

    • Cancer

    • Cardiovascular or heart disease

    • Celiac disease

    • Cerebral palsy

    • Deaf or hard of hearing

    • Depression or anxiety

    • Diabetes

    • Epilepsy

    • Gastrointestinal disorders, for example, Crohn's Disease, or irritable bowel syndrome

    • Intellectual disability

    • Missing limbs or partially missing limbs

    • Nervous system condition for example, migraine headaches, Parkinson’s disease, or Multiple sclerosis (MS)

    • Psychiatric condition, for example, bipolar disorder, schizophrenia, PTSD, or major depression

    Disability Status


    PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.


    Development
    opportunities

    Work-life
    balance

    High-tech
    industry

    Talented team

    What our employees say

    Radosław EN

    For me, working at 3DGence means work in a very friendly atmosphere among very talented people. Here you always have the opportunity to develop further at the company by means of personal initiative and good performance. It is incredibly exciting that I can work for a company that has a significant impact on the development of the industry.

    Radosław, 3D Printing Engineer

    Bartosz EN

    3DGence gives us the possibility to work on projects you wouldn’t have the chance to touch elsewhere. 3D printing industry is constantly evolving and it is amazing, that I am involved in the development of new products and help to further optimize processes.

    Bartosz, Constructor

    Damian EN

    3D printing background is not required if you want to work with in 3DGence. Before I got job here I didn't know anything about the 3D printer construction, but thanks to the professional training I could be a part of a great team. I can feel that the people I work with all share a high level of commitment and pride in what we do.

    Damian, Production worker

    Did not find an offer that suits you?
    Apply directly