Print end-parts, functional prototypes, jigs & fixtures that
are precise and durable.
Interchangeable printing modules
3DGence INDUSTRY F420 features a modular approach to printing capabilities. Use job-specific printing modules combined with the predefined and engineered printing profiles. Always get the best print quality with high-performance polymers. Make parts from PEEK
ABS, ASA, PC, PA or ULTEM™ AM9085F filaments.
Manufacture large or multiple parts while maintaining maximum material performance.
Large high-temperature printing chamber
With maximum chamber temperature of 180°C and dimensions of 380 x 380 x 420 mm you can 3D print large models or produce multiple parts in one run. Use engineering and high-performance materials in a controlled environment that ensures dimensional accuracy and superior mechanical performance of the parts.
3DGence INDUSTRY F420 pushes the boundaries of printing speed of industrial 3D printers.
Printing speed was the key development aspect of this printer. With 1 m/s of travel speed and the printing speed of up to 400 mm/s INDUSTRY F420 is not only a great tool for short production series or rapid prototyping but also a full-fledged additive manufacturing system.
Keep your materials dry and ready to print.
Heated filament chamber with automatic spool change system
Materials are kept in a stable environment thanks to the heated materials chamber. There are 4 material bays in the filament chamber: two dedicated for model materials and two for the support. When the material is running out, the printer will automatically switch to the second full material bay.
Safe and low maintenance solution.
Air filtration, signal tower, autocalibration and more
Industrial-grade air filtration unit removes styrene, VOC, PM 2.5 and PM 10. 3DGence INDUSTRY F420 can also be equipped with a signal tower and UPS backup power unit.
Advanced autocalibration makes this printer easy and safe to operate.
The whole system can be managed through a dedicated cloud service 3DGence CLOUD. Manage your prints, schedule maintenance and check the printing status remotely.
DOWNLOAD THE SPECIFICATION
1. What model materials can be printed?
Pre-defined profiles are ready for ULTEM, PEEK, PC, ABS, ASA, PA and PLA. More material profiles are constantly developed and added to 3DGence SLICER 4.0.
2. What support materials can be used?
Engineering support material (ESM-10) for ABS, ASA, PC and PEEK.
3. Can I use third-party filaments?
Users can print with third party materials, but 3DGence cannot guarantee the quality and dimensional accuracy of the parts.
4. What slicing software can I use?
3DGence INDUSTRY F420 uses new type of machine code .3DG. Only 3DGence SLICER 4.0 is supported.
5. Where can I purchase 3DGence INDUSTRY F420?
The printer is available through a wide net of distributors all over the world. Contact us and we will redirect you to the nearest 3DGence Partner.
6. When will 3DGence INDUSTRY F420 be available?
3DGence INDUSTRY F420 will be available since 19.11.2019 with first units to be delivered in December 2019.